RESUMO
An experimental protocol was studied to improve the adhesion of a polymeric poly(methyl methacrylate) coating that was modified with silver nanoparticles to an aluminum alloy, AA2024. The nanoparticles were incorporated into the polymeric matrix to add the property of inhibiting biofilm formation to the anticorrosive characteristics of the film, thus also making the coating antibiocorrosive. The protocol consists of functionalizing the surface through a pseudotransesterification treatment using a methyl methacrylate monomer that bonds covalently to the surface and leaves a terminal double bond that promotes and directs the polymerization reaction that takes place in the process that follows immediately after. This results in more compact and thicker poly(methyl methacrylate) (PMMA) coatings than those obtained without pseudotransesterification. The poly(methyl methacrylate) matrix modified with nanoparticles was obtained by incorporating both the nanoparticles and the methyl methacrylate in the reactor. The in situ polymerization involved combining the pretreated AA2024 specimens combined with the methyl methacrylate monomer and AgNps. The antibiofilm capacity of the coating was evaluated against P. aeruginosa, with an excellent response. Not only did the presence of bacteria decrease, but the formation of the exopolymer subunits was 99.99% lower than on the uncoated aluminum alloy or the alloy coated with unmodified poly(methyl methacrylate). As well and significantly, the potentiodynamic polarization measurements indicate that the PMMA-Ag coating has a good anticorrosive property in a 0.1-M NaCl medium.
Assuntos
Ligas , Alumínio , Anti-Infecciosos , Materiais Revestidos Biocompatíveis , Nanopartículas Metálicas , Polimetil Metacrilato , Prata , Ligas/química , Alumínio/química , Anti-Infecciosos/química , Anti-Infecciosos/farmacologia , Biofilmes/efeitos dos fármacos , Materiais Revestidos Biocompatíveis/química , Nanopartículas Metálicas/química , Nanopartículas Metálicas/ultraestrutura , Testes de Sensibilidade Microbiana , Espectroscopia Fotoeletrônica , Polimetil Metacrilato/química , Pseudomonas aeruginosa/efeitos dos fármacos , Propriedades de SuperfícieRESUMO
Silver nanofibers (Ag-Nfbs)~80nm in diameter were synthesized by hydrothermal treatment. The nanofibers (3 and 5wt%) were added in the initial feed together with the catalytic system. Polymerizations in an ethylene atmosphere were performed, yielding PE nanocomposites in situ with 3 and 5wt% content of Ag-Nfbs. The antibacterial effect of the silver-nanofiber composites was evaluated after incubation of Escherichia coli ATCC 25923 for 8h on their surface. Bacterial viability tests showed that the silver-nanofiber composites inhibited the growth of Escherichia coli ATCC 25923 by 88 and 56%. This behavior is attributed to increased silver ions release from the nanocomposite. TEM analysis showed that the antibacterial effect is associated with membrane disruption but not with changes in shape.
